Here are the various 3D print files that make up my Optical Rail System.
The Receiver mount is made up of three parts; Vertical Slider, Horizontal Slider, and the Tripod mount.
Vertical Slider
Horizontal Slider
Tripod Mount
Thingiverse is the site where I store the files for my Optical Rail System. Here are the links where you can download the 3-axis receiver mount.
Vertical Slider: https://www.thingiverse.com/thing:3783360
Horizontal Slider: https://www.thingiverse.com/thing:3855590
Tripod Mount: https://www.thingiverse.com/thing:3667693
The lens mount has 2 options. The first is a 160mm wide mount suitable for frames up to 12 inches. For longer frames, for holding larger than 12 in square Fresnel lenses, use the 190mm wide mount.
The frames I use are the "build your own frame" kits available at art supply and craft stores.
Lens Bracket with Frame attached with 1/4 inch bolts with lock nuts
160mm & 190mm Lens Bracket: https://www.thingiverse.com/thing:3855639
Connecting hardware for the 3-axis mount is 1/4 inch nuts and bolts, for the lens bracket it is 1/4 inch bolts with lock nuts.
Connecting hardware for the 3-axis mount is 1/4 inch nuts and bolts, for the lens bracket it is 1/4 inch bolts with lock nuts.
73,
Warren - WF0T
No comments:
Post a Comment